1.喷漆前先查看东西与工作环境
1 before painting to see things and work environment
空气压缩机内的水份，油质必先释出。彻底清洗、查看喷塑烤房、通风滤网。清洗喷塑烤房地上。
Air compressor oil in the water, first released. Thorough cleaning and check spray barn, ventilation filter. Cleaning spray baking room on the ground.
2.外表洁净
2 clean appearance
施喷外表必定要用水洗洁净，有油质，蜡质要用出有剂出油，新焊接或除铁锈后的金属外表要用——环氧树脂防锈底漆处理以防生锈。
Spraying must be washed clean appearance, there is oily wax with a agent oil, new welding or metal appearance except rust after use of epoxy resin antirust primer to prevent rust.
3.准确的砂磨办法
3 accurate grinding method
运用砂纸不要太用力，尽可能用细一点的砂纸。
Don't use sandpaper too hard, as far as possible with a thin sandpaper.
4.用高质量稀释剂
4 high quality diluent
对稀释剂不要打经济算盘，运用配套的稀释剂，油漆可表现最高质量，运用廉价的稀释剂可节约数元，但将支付更多时刻与精力；运用高质量稀释剂，工作将会更顺手。
Economical use of thinner, thinner, do not paint can show the highest quality, the use of inexpensive diluent can save several yuan, but will pay more time and energy; the use of high-quality diluent, work will be more easily.
5.硬化剂及稀释剂的两要准确
5 hardening agent and diluent two to be accurate
硬化剂及稀释剂份额不准确将影响漆的作用。
Hardening agent and diluent does not affect the role of paint.
6.杰出的底漆
6 excellent primer
不论喷涂、纯色烤漆、银底烤漆，应该运用质量杰出，以增加附着性、光泽度。
Regardless of color coating, paint, silver bottom paint, should use good quality, in order to increase the adhesion, gloss.
7.拌和要均匀
7 mixing should be uniform
不论哪一种漆，哪一厂家，拌和均匀是最主要的，尤其是富含银粉的。
No matter what kind of paint, which manufacturers, uniform mixing is the most important, especially rich in silver powder.
8.空气压力要恰当
8 air pressure should be appropriate
枪嘴压力坚持在40—50镑时最为抱负，太大或太小的压力会影响喷涂作用及形成浪费。
Muzzle pressure is the most ambitious in 40 - 50 pounds, too large or too small pressure will affect the role of spraying and the formation of waste.
9.准确的喷涂办法应遵循商品运用阐明书
9 accurate spraying methods should follow the use of the book
坚持喷枪与物件间隔在15—20公分，每次喷涂间隔5—10分钟，每一种商品有不一样的施工阐明，例如：硬化剂混合、喷涂间隔、可用时刻等。
Adhere to the spray gun and the objects in the interval of 15 - 20 cm, each spray interval of 5 - 10 minutes, each commodity has a different description of the construction, such as: hardener mixing, spraying interval, available time, etc..
10.通风要杰出
10 ventilation should be outstanding
11.喷涂环境要洁净
11 spraying environment to clean